[myHD 0.5.1] RC2 version ... Add Ubuntu 1804 Bionic

New total application manager for HD_Station
tarkett
Posts: 15
Joined: Tue May 29, 2018 7:19 pm
Has thanked: 2 times
Been thanked: 2 times

Re: [myHD 0.3.1] BETA version ...

Post by tarkett » Fri Sep 28, 2018 10:02 pm

datamax83 wrote:
Fri Sep 28, 2018 8:47 pm
Hello Philippe,

first I have to thank you again for your fantastic work. :D :D I have now changed everything from mykodi 18 to QPKG myHD 0.3.1 with mykodi 18 is it right the pulse cec adapter no longer works? :|
Same (or other) problem on my system with mykodi 17. The sound goes to the Samsung TV and not to the connected Soundbar as before.
I I choice the Soundbar directly in the Kodi settings it works.
My environment:
* NAS Qnap TVS-682 with 4.3.5.0722 + myHD Version 0.5.1 (Ubuntu 1804) with mykodi18
* Samsung TV connected via HDMI to NAS + Samsung Soundbar is connected via Bluetooth to the TV
User avatar
philippe
Site Admin
Posts: 150
Joined: Mon Apr 16, 2018 3:10 pm
Has thanked: 2 times
Been thanked: 15 times

Re: [myHD 0.3.1] BETA version ...

Post by philippe » Sat Sep 29, 2018 9:10 am

Hi,
datamax83 wrote:
Fri Sep 28, 2018 8:47 pm
Hello Philippe,
I have now changed everything from mykodi 18 to QPKG myHD 0.3.1 with mykodi 18 is it right the pulse cec adapter no longer works? :|
LOG:
19:45:33.934 T:140229985941248 NOTICE: Register - new cec device registered on cec->/dev/ttyACM0: CEC Adapter (2548:1002)
19:45:44.426 T:140229553047296 ERROR: OpenConnection - could not opening a connection to the CEC adapter
best regards
datamax83
I don't own a CEC adapter so all my help is theoritical ...
can you search in log if libcec is loaded ... somethings like
DEBUG: SECTION:LoadDLL(libcec.so.4)

Thanks.
PLEASE open separate post ... to be able to follow your message more clearly
Philippe.
QNAP / Asustor package integrator
User avatar
philippe
Site Admin
Posts: 150
Joined: Mon Apr 16, 2018 3:10 pm
Has thanked: 2 times
Been thanked: 15 times

Re: [myHD 0.3.1] BETA version ...

Post by philippe » Sat Sep 29, 2018 9:19 am

Hi,
tarkett wrote:
Fri Sep 28, 2018 10:02 pm
datamax83 wrote:
Fri Sep 28, 2018 8:47 pm
Hello Philippe,

first I have to thank you again for your fantastic work. :D :D I have now changed everything from mykodi 18 to QPKG myHD 0.3.1 with mykodi 18 is it right the pulse cec adapter no longer works? :|
Same (or other) problem on my system with mykodi 17. The sound goes to the Samsung TV and not to the connected Soundbar as before.
I I choice the Soundbar directly in the Kodi settings it works.
Did you use mykodi17 in myHD or the previous delivery in HD_Station only ? (please confirm NAS model, QTS and HD_Station version you use)
I have some difficulty to understand exactly the problem (sorry I am in front of your QNAP nor seeing your hardware configuration
can you detail the link
NAS - HDMI - ??? - ....
and the settings

The code use for generated myHD/mykodi17 is the same but the environment not ... so perhaps I forgot somethings ... I have put mykodi17 for comparison purpose with kodi18 configuration rules ...
PLEASE open separate post ... to be able to follow your message more clearly
Philippe.
NB even I don't own an AVR or a soundbar ... I can now (from today) do more test ... I am back in my labs after weeks of absence ...
QNAP / Asustor package integrator
User avatar
philippe
Site Admin
Posts: 150
Joined: Mon Apr 16, 2018 3:10 pm
Has thanked: 2 times
Been thanked: 15 times

Re: [myHD 0.3.1] BETA version ...

Post by philippe » Sat Sep 29, 2018 9:42 am

Hi,
datamax83 wrote:
Fri Sep 28, 2018 8:47 pm
LOG:
19:45:33.934 T:140229985941248 NOTICE: Register - new cec device registered on cec->/dev/ttyACM0: CEC Adapter (2548:1002)
19:45:44.426 T:140229553047296 ERROR: OpenConnection - could not opening a connection to the CEC adapter
best regards
datamax83
In complement of my previous response just here before ... (one or two post before)
can you verify :
1 that user is in plugdev and input group(s) (not 100% sure that it's require)
using myHD_root :
groups qnap (for ex.)
if not listed:
usermod -a -G plugdev,input qnap or only one if user is already in another one ...
2 the access right for /dev/ttyACM0
ls -ali /dev/ttyACM0
same if user (qnap here) don't have the group in it list do it
usermod -a -G GROUP_OF_TTYACM qnap

Philippe.
QNAP / Asustor package integrator
tarkett
Posts: 15
Joined: Tue May 29, 2018 7:19 pm
Has thanked: 2 times
Been thanked: 2 times

Re: [myHD 0.3.1] BETA version ...

Post by tarkett » Sat Sep 29, 2018 2:59 pm

philippe wrote:
Sat Sep 29, 2018 9:19 am
The code use for generated myHD/mykodi17 is the same but the environment not ... so perhaps I forgot somethings ... I have put mykodi17 for comparison purpose with kodi18 configuration rules ...
PLEASE open separate post ... to be able to follow your message more clearly
Philippe.
I do it --> https://father-mande.ovh/phpBB3/viewtop ... =27&t=1516

Best regards
tarkett
My environment:
* NAS Qnap TVS-682 with 4.3.5.0722 + myHD Version 0.5.1 (Ubuntu 1804) with mykodi18
* Samsung TV connected via HDMI to NAS + Samsung Soundbar is connected via Bluetooth to the TV
datamax83
Posts: 2
Joined: Fri Sep 28, 2018 4:25 pm
Has thanked: 0
Been thanked: 0

Re: [myHD 0.3.1] BETA version ...

Post by datamax83 » Sat Sep 29, 2018 4:46 pm

philippe wrote:
Sat Sep 29, 2018 9:42 am
Hi,
datamax83 wrote:
Fri Sep 28, 2018 8:47 pm
LOG:
19:45:33.934 T:140229985941248 NOTICE: Register - new cec device registered on cec->/dev/ttyACM0: CEC Adapter (2548:1002)
19:45:44.426 T:140229553047296 ERROR: OpenConnection - could not opening a connection to the CEC adapter
best regards
datamax83
In complement of my previous response just here before ... (one or two post before)
can you verify :
1 that user is in plugdev and input group(s) (not 100% sure that it's require)
using myHD_root :
groups qnap (for ex.)
if not listed:
usermod -a -G plugdev,input qnap or only one if user is already in another one ...
2 the access right for /dev/ttyACM0
ls -ali /dev/ttyACM0
same if user (qnap here) don't have the group in it list do it
usermod -a -G GROUP_OF_TTYACM qnap

Philippe.
Hello Philippe,

sorry I will open a new topic in the future.

My environment:
- NAS Qnap TS-453A with 4.3.4.0695
- myHD Version 0.3.1 with mykodi 17 + mykodi 18
- Sony TV connected via HDMI Port 4 to Pulse-CEC connected via USB and HDMI to NAS HDMI 1
- Sony TV connected via HDMI Port 1 to Audio System

To answer your question yet. With myKodi 18 (Ubuntu 14.06) without myhd, there were no CEC problems.
You are my hero! It's up to the right which I changed like this now runs Pulse-CEC. Can you handle that in your next version?

usermod -a -G dialout qnap
chmod a+rw /dev/ttyACM0


Thank you for your time and support.

best regards
datamax83
User avatar
philippe
Site Admin
Posts: 150
Joined: Mon Apr 16, 2018 3:10 pm
Has thanked: 2 times
Been thanked: 15 times

Re: [myHD 0.3.1] BETA version ...

Post by philippe » Sat Sep 29, 2018 5:18 pm

Hi,
datamax83 wrote:
Sat Sep 29, 2018 4:46 pm
Hello Philippe,
My environment:
- NAS Qnap TS-453A with 4.3.4.0695
- myHD Version 0.3.1 with mykodi 17 + mykodi 18
- Sony TV connected via HDMI Port 4 to Pulse-CEC connected via USB and HDMI to NAS HDMI 1
- Sony TV connected via HDMI Port 1 to Audio System
To answer your question yet. With myKodi 18 (Ubuntu 14.04) without myhd, there were no CEC problems.
You are my hero! It's up to the right which I changed like this now runs Pulse-CEC. Can you handle that in your next version?

usermod -a -G dialout qnap
chmod a+rw /dev/ttyACM0

datamax83
Thanks for testing ... I will add this for new user or fresh install ... I will see if it's possible without requiring large shell for existing users

Again, thanks to help the myHD community ... I am a user like you and don't have lot of hardware to run all possibilities ...

In first stage I will add this to the topic : Tips & Tricks

Philippe.
QNAP / Asustor package integrator
User avatar
philippe
Site Admin
Posts: 150
Joined: Mon Apr 16, 2018 3:10 pm
Has thanked: 2 times
Been thanked: 15 times

Re: [myHD 0.4] RC1 version ...

Post by philippe » Tue Oct 02, 2018 5:53 pm

Hi,
[Version]
Release Candidate : 0.4
... ... ... ... ATTENTION in case of update ... the folder are rename (it's done by the QPKG install ... but ... )
... solve multiple small bugs
... ADD support for multiple Ubuntu version .... target Bionic 18.04 L.T.S. (few days) for the moment beside 16.04 but easy to get existing settings
... ... Alpha version works well ... but need some adaptation to be compliant with actual myHD (hope in days)
... ADD new task to get a better sound card visibility (direct access vs. pulse access) in Application (like Kodi18/17)
... Updated Ubuntu for fresh install (do by myHD apt_upgrade_package for installed users)
... ... include last Chrome (69.0.3497.100) and last Kodi18 Beta2
... introduce new concept (require a dynamic change in HD_Station) to support IR (remote control) including QNAP model IN HD_Station and IN Ubuntu myHD namespace (T.B.C. more test are require)
Documentation to integrate very simply your (any) application is in the process of writing ... so be patient ...
FORGOT : ... to add input group to users ... for IR-CEC support ... sorry I will do it in next R.C. please do it manually as explain in message on the subject in this sub-forum (just the previous post in this topic)

Philippe.
QNAP / Asustor package integrator
User avatar
philippe
Site Admin
Posts: 150
Joined: Mon Apr 16, 2018 3:10 pm
Has thanked: 2 times
Been thanked: 15 times

Re: [myHD 0.4.1] RC1 version ... 0.4 + 1 patch

Post by philippe » Wed Oct 03, 2018 10:50 am

Hi,

small but mandatory update :

[Version]
Release Candidate : 0.4.1
... solve severe Bug in myHD internal QPKG build script (sorry ... it's due to the renaming folder)

Philippe.
QNAP / Asustor package integrator
FlyGoneCrazy
Posts: 3
Joined: Fri Oct 05, 2018 9:34 am
Has thanked: 0
Been thanked: 0

Re: [myHD 0.4.1] RC1 version ... 0.4 + 1 patch

Post by FlyGoneCrazy » Fri Oct 05, 2018 7:18 pm

Great stuff!

After the first test day I'm missing the following things:
  • PVR clients;
  • A possibility to use old config from mykodi18 (I've tried to copy old one or link to it, but the kodi18 doesn't start at all;
  • vlc and chrome installations (seems that for the moment only kodi17, plex and kodi18 are available).
Thanks for creating the best qnap apps!
Post Reply